TL725D is a gyroscope IMU specialized in navigation applications for agricultural machinery automatic driving, with built-in industrial grade three-axis gyroscope and three-axis accelerometer. The product can still output smooth posture data under the high vibration characteristics of agricultural machinery. Developed based on the company's latest MEMS inertial measurement platform, through the dynamic attitude algorithm of the angular rate of the gyroscope, the real-time output of the object's dynamic inclination angle, horizontal azimuth angle, three-axis angular rate, three-axis acceleration and forward axial body acceleration data . This product is specially used for automated agricultural machinery, precise operation and efficiency, and is an essential component of a new generation of automated precision agricultural control.
TL725D
PARAMETERS
Three-axis attitude
Azimuth ±180°,Roll angle±180°,Pitch angle±90
Bandwidth
>100Hz
Resolution
0.01°
Nonlinear
0.1% of FS
Gyro Range
300°/s
Zero bias instability of gyro (allan)
4.0°/h
Angle random walk coefficient (allan)
0.25 °/sqrt(h)
Accelerometer range
±4g
Acceleration resolution
0.001g
Acceleration accuracy
1mg
Startup time
250ms
Input voltage
+9~36V
Current
35mA(12V)
Working temp
-40 ~ +80℃
Storage temp
-40 ~ +85℃
Vibration
5g~10g
Shock
200g pk,2ms,½sine
Working life
10 Year
Output frequency
5Hz / 15Hz / 25Hz / 35Hz / 50Hz / 100Hz Settable
Output signal
RS232 / RS485 / (Optional)
MTBF
≥50000 Hours/times
Insulation resistance
≥100MΩ
Shockproof
100g@11ms,3 Axial Direction (Half Sinusoid)
Anti-vibration
10grms,10～1000Hz
Protection grade
IP67
Cable
Standard 1 m 4 pin shield wire
Weight
140g(without cable)
FAQ
How long is the delivery time of the products?
A: Usually we have stock for every type of products, if the product that you selected we have in stock, then we only need to re-test it before leaving the factory, so the delivery time is around 2~4 days; if we don’t have them in stock, then we need to arrange the production, the delivery time will be around 2 weeks. For the customer-oriented design products, our engineers will give the approximate delivery time according to the technical requirements.
Q: How about the payment conditions?
A: we accept 40% prepayment in advance, and the balance 60% payment before the delivery. For the customer-oriented design product, the payment will be discussed together.
Q: How will we do if the product has the quality problem?
A: Our products have passed very strict tests before delivery, so it is very low probability to have quality problem. If our products have quality problem (not caused by man-made factors) in the warranty period, our factory will arrange the free repair. If the product can’t repair well, we will arrange to provide a new one. If the product is out of warranty time, we will provide the repair only charging the material cost.
