AKG392 Digital Type Triaxial Accelerometer With Displacement Velocity Frequency Output Vibration Sensor
▶ MAIN FEATURE
★ Three axes (X, Y, Z)
★ Output signal: RS232; RS485; TTL
★ Power supply voltage: 9~36V
★ Impact resistance: 2000G
★ Working temperature: -40°C ~ +85°C
★ Storage temperature: -40°C ~ +85°C
★ Size: L34.3×W34.3×H38.5mm
★ Excellent deviation stability, good environmental performance (shock, vibration and temperature)
▶ APPLICATION
★ Medical equipment
★ Bridge
★ Automobile
★ Road roller
★ Crash records, fatigue monitoring and prediction
★ Wind power generation
★ Large machinery, engines
★ Low-frequency vibration and automatic monitoring
★ Traffic system monitoring, roadbed analysis and high-speed railway fault detection
▶ INTRODUCTION
The AKG392 triaxial accelerometer is a new accelerometer independently developed and produced by Rion Technology applied in wide range of applications, which covers many fields such as vibration testing and impact testing. The product adopts digital interface output with options as RS232/485/TTL. Different address codes can be set, multiple accelerometers can be installed in series for long distance, which is convenient for multi-point measurement and data analysis. Internal FFT processing can directly output the object vibration frequency and speed and Amplitude, convenient for users to analyze data.
The users can change the sampling frequency according to the actual frequency of the object to improve the frequency measurement accuracy. AKG392 is a single crystal silicon capacitive sensor, which consists of a silicon chip processed by micro-machines, a low-power ASIC for signal adjustment, a microprocessor for storing compensation values, and a temperature sensor. This product has low power consumption, calibration, sturdy structure, and stable output. The new electronic configuration provides solid-state power for reset and protection from over-voltage. The long-term stability and deviation of the scale factor in the full-scale range are typically less than 0.1%. This series of products have the characteristics of sturdy structure, low power consumption, and excellent deviation stability, ensuring stable output reliability.
Specifications
| AKG392 | PARAMETERS | UNIT |
| Range | ±2 | ±4 | ±8 | ±10 | ±20 | ±40 | g |
| Bias calibration | <1 | <1 | <1 | <1 | <1 | <1 | mg |
| Measure axis | X,Y,Z | X,Y,Z | X,Y,Z | X,Y,Z | X,Y,Z | X,Y,Z | axis |
| Power on/off repeatability | <2 | <2 | <2 | <2 | <2 | <2 | mg(max) |
| Bias temperature coefficient | 0.15 | 0.15 | 0.15 | 0.75 | 0.75 | 0.75 | %/℃(typical) |
| Resolution/threshold (@ 1Hz) | < 1 | < 1 | < 1 | < 1 | < 1 | < 1 | mg(max) |
| Non-linearity | <0.5 | <0.8 | <1 | <1 | <1 | <1 | % FS(max) |
| Bandwidth (3DB) | 500 | 500 | 500 | 500 | 500 | 500 | Hz |
| Cross axis sensitivity | 1 | 1 | 1 | 2 | 2 | 2 | % |
| Transverse vibration sensitivity ratio | 1 | 1 | 2 | 5 | 5 | 5 | % |
| Resonance frequency | 2.4 | 2.4 | 2.4 | 5.5 | 5.5 | 5.5 | kHz |
| Output rate | 5Hz,10Hz,25Hz,50Hz,100Hz,200Hz,500Hz,1000Hz |
| Output Interface | RS232/RS485/TTL |
| Protocol | RION 68 protocol and MODBUS RTU protocol |
| Reliability | MIL-HDBK-217,Grade 2 |
| Impact resistance | 100g@11ms, 3 Axial Direction (Half Sinusoid) |
| Recovery Time | <1ms(1000g, 1/2 sin 1ms, Impact on the i-axis) |
| Vibration | 20g rms,20~2000Hz (Random noise, o, p, i acts on each axis for 30 minutes) |
| Input(VDD_VSS) | 9~36 VDC |
| Operating current consumption | <60mA @ 12 VDC |
| Connector | Industry standard M12 connector |
| Weight | Product net weight: 82g, Magnetic base: 48g, L-shaped adapter plate 20g |
| Size | Product size: 34.3*34.3*38.5mm Magnetic adsorption base size: 34.23*34.23*6mm L-shaped adapter plate size: 36*44*15mm |
▶ VIBRATION PARAMETER INDEX
The product's vibration frequency, speed, and displacement are derived from data analysis, where frequency is the main frequency of the current object vibration frequency, speed is the maximum vibration speed, and displacement is the maximum amplitude value of the object vibration. Because of the irregularity of the object vibration, the data is only used reference.
| INDEX | VALUE | UNIT |
| Acceleration | 2,4,8,10,20,40 | g |
| Speed | Vibration speed | m/s |
| Amplitude | Vibration amplitude value | m |
| Frequency | 0~500 | Hz |
| Frequency resolution | 4 | Hz |
Product Tags:
|
|
AKG392 Digital Triaxial Accelerometer With Displacement Velocity Vibration Sensor Images
|
