★ Turck-mounted satellite antenna equipment ★ Industrial control
▶ GENERAL DESCRIPTION
TL740D is RION-TECH newly developed horizontal azimuth angular gyro sensor based on latest MEMS inertial measurement platform , by means of the dynamic attitude algorithm for the angular velocity of gyroscope ,it can simultaneously output carrier’s azimuth angle .The product inernal integrated RION-TECH Patent Inertial navigation algorithm, through the model of attitude angle data fusion , can solve the gyro short time drift problem as much as possible .
This product is specially used for robot car, AGV vehicle azimuth orientation, attitude control and other related applications , instead of the traditional robot vehicle magnetic bar guide shortcomings, no need at the site layout of magnetic stripe, is the necessary navigation components for the next generation of robot vehicle automatic tracing and driving.
TL740D
PARAMETERS
Mesure range
Azimuth Angle (±180°)
Acquisition bandwidth
>100Hz
Resolution
0.01°
Azimuth accuracy
<0.1°/min
positional accuracy
<2mm/m (converted from angle accuracy)
Nonlinear
0.1% of FS
Max angle rate
150°/s
Accelerometer range
±4g
Acceleroemter resultuion
0.001g
Acceleroemter accuracy
5mg
Starting time
5s(Static)
Input Voltage
+9V~36V
Current
60mA(12V)
Working Temp.
-40 ~ +85℃
Storage Temp.
-40 ~ +85℃
Vibration
5g~10g
Impact
200g pk,2ms,½sine
Working life
10 years
Output rate
1Hz~100Hz can set
Output signal
CAN2.0A / CAN2.0B
MTBF
≥50000 hours /times
Insulation resistance
≥100 Megohm
Impact resistance
100g@11ms,3 Axial Direction (Half Sinusoid)
Anti-vibration
10grms,10～1000Hz
Protecting
IP67
Weight
130g(Without cable)
FAQ
How long is the delivery time of the products?
A: Usually we have stock for every type of products, if the product that you selected we have in stock, then we only need to re-test it before leaving the factory, so the delivery time is around 2~4 days; if we don’t have them in stock, then we need to arrange the production, the delivery time will be around 2 weeks. For the customer-oriented design products, our engineers will give the approximate delivery time according to the technical requirements.
Q: How about the payment conditions?
A: we accept 40% prepayment in advance, and the balance 60% payment before the delivery. For the customer-oriented design product, the payment will be discussed together.
Q: How will we do if the product has the quality problem?
A: Our products have passed very strict tests before delivery, so it is very low probability to have quality problem. If our products have quality problem (not caused by man-made factors) in the warranty period, our factory will arrange the free repair. If the product can’t repair well, we will arrange to provide a new one. If the product is out of warranty time, we will provide the repair only charging the material cost.
TL740D
